Magnetic mount for 10mm ESD snaps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple magnetic mount for common 10mm ESD snap connectors.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple magnetic mount for 10mm ESD snap connectors that are commonly used around electronics workstations, including ESD mats, wrist straps, and grounding cords.
I wanted a magnetic mount that would allow me to connect an ESD mat to a steel rolling cart. I wanted the snap to be firmly mounted but also easily removable in case I needed to clean or replace the mat. A magnetic mount seemed like a nice way to accomplish this.
This mount requires three 6x10mm magnets and a common 10mm ESD snap. I had a hard time locating affordable ESD snaps but discovered that General Snap Fastener Kit 1265 is available at most hardware stores. I recommend using brass snaps because they are much easier to crimp than stainless (this mount does not require crimping, but many other situations do require a crimped snap).
I used a ring terminal to connect to the snap and secured it in place with a small countersunk screw and nut.