Lecarra/Moto-Lita Steering Wheel Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lecarra/Moto-Lita Steering Wheel and Horn Button Mount for Shadow Box or Wall Mounting.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 614
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
After wanting to mount my Vintage Lecarra Steering Wheel from the Pinto in a Shadow Box I found that the wheel was hard to mount along with the Horn Button, so I made this mount that could be easily printed along with a trim ring to allow for Display Mounting.
I have made the model so that the 9 holes that hold the Wheel could either be through-mounted to the surface or they could take an M4-0.7 Heat-Set (I prefer the ShineNow Brass Heat-Set Inserts, link below) in back to allow for a tapered M4 Fastener to be used. The center mounting would be the preferred method of mounting.
This will likely fit any 9-Hole Wide Mounted steering wheel, but is specifically made and tested on the Lecarra and Moto-Lita MK4 Steering Wheels.
M4 ShineNow Heat-Set, Short:
https://a.co/d/4gmupyx
Print Settings:
Printer brand: Creality
Printer: Ender-3 S1 Pro
Rafts: No
Supports: No
Resolution: 0.15
Infill: 30%
Filament brand: Esun
Filament color: Black
Filament material: PLA+