0.2mL PCR strip magnetic rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @RyanMulqueen 0.2mL PCR strip magnetic rack for use with magnetic beads (smaller hole size and 6x3mm magnets)
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 298
- Wydruki
- 0
- Wyświetlenia
- 1554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution
Description:
I liked the magnetic rack design by RyanMulqueen for 0.2mL PCR strip which can be used in high or low position, so I reproduced the design with minor changes to fit my needs.
Main modifications:
- Small reduction of the hole size for the PCR strip to reduce wobble I had with our eppendorf 0.2mL strips
- Modified the magnet hole size to fit 6x3mm N35 magnets I had
- Made a simple plug to force fit into magnet holes
You can stack 2x (6x3mm) magnets for increased strength (One N35 magnet worked on the original design but was weaker than a commercial rack in our lab).
Print Settings
Printer: Ender 3 Pro
Filament: Eryone PETG transparent blue
layer height = 0.2mm
Supports: yes
Assembly:
To insert the magnet plugs, I laid the rack flat on its front on a table and gently forced the plugs into the holes where I inserted the 2 magnets with the handle end of a screw driver (you could also use pliers).