Infill Designs Coaster Set (w/ Holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coasters inspired by infill sample swatches! If it can support a top layer, it can support a drink!
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 374
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Inspired by the look of infill swatches, I designed a series of simple coasters where the pattern is provided entirely by the slicer!
Since the text and the infill pattern are done in the slicer, I don't have pre-made models to offer, only the sliced .gcode and the PrusaSlicer project itself!
Easy to print, with filament change instructions baked in for a two-color print (including one at the end to help re-set). For compatibility, I generated the gcode with default slicer speeds, so you can probably speed them up a lot.
There's also a holder included, also as a project file - it prints with only infill and no perimeter, and matches the “Octogram Spiral” coaster since it's my favorite :)
One last note - try infill amounts like “19.85%" for Concentric and Lightning in order to slightly adjust the look. It acts like it only takes a whole number and won't save the decimal part, but it will work if you coerce it to.
Photographed ones are printed in Prusament PLA - Galaxy Black and Marble Gray.