QRS Player Piano Music Roll
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement "Music Roll" for QRS Player-Piano music rolls
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement "Music Roll" for QRS Player-Piano music rolls.
On a player piano, this is required to hold the music roll centered, while allowing it to rotate freely.
Originally, we lost several of these ends which are required to insert the music roll into a player piano and play them. Upon trying to use the ends on some music, I found that there isn't a standard size for all rolls- some use different-sized cardboard, thus I made the entire roll from scratch to get around this problem.
If you have a cardboard roll the same size as most of mine, you could print just the end cap, or just the drive end. Note that the drive end must be glued. The cap end does not need glued.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
10%
Notes:
Print most parts as-is with supports on the parts that need supports.
I recommend printing such that the ends which slide against the paper are up- that way you don't have support vestiges to rough up the paper.
Category: Music