1 / 2
Huawei Inverter SUN2000 Fanduct / 4x 92mm fans
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a quick fanduct for the Huawei inverter.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 1487
- Wydruki
- 4
- Wyświetlenia
- 8841
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 4) (Komentarze: 21)Remiksy (1)Kolekcje (57)Powiązane
You need 4 90/92mm fans. Print the two parts and glue them together. The duct is mounted with 2 screws on each side. For the fans you need m3 screws. On the back are holes for zipties.
Post a make :)