1 / 1
Patio Umbrella Base Adaptor-Parametric
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric Patio Umbrella Base Adaptor for patio umbrellas to fit in larger bases
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 439
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
Parametric Patio Umbrella Base Adaptor for patio umbrellas to fit in larger bases.
My Patio umbrella has a smaller diameter hole than the weighted base I have. So I made this adapter to make umbrella sit tight and plumb.
The STL file here has umbrella diameter of 1.35 in and base diameter of 2.025 in
I used PETG for temperature resistance
Print with rim side down
Here is the onshape link to adjust parameters as needed. Just adjust the named variables for your umbrella pole diameter and base diameter