1 / 1
Extra-wide lens hood for Canon RF 24-70mm f2.8L IS USM — zdjęcie 1

Extra-wide lens hood for Canon RF 24-70mm f2.8L IS USM

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The stock hood for Canon's RF 24-70mm f2.8L lens isn't wide enough to easily accept a VND filter. This fixes that.

Ocena
0 / 5
Polubienia
19
Pobrania
228
Wydruki
0
Wyświetlenia
1226
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

Simple to print--a single piece, no supports required. Flexible tabs click this lens hood into place when you put it on the lens.

Mine was printed in black matte PLA (for minimum reflectivity) on a Prusa Mini with a stock 0.4mm nozzle at 0.2mm layer height. For better layer adhesion around the edges of the hood, I turned up the nozzle temp to the high end of the recommended range for my particular PLA, and turned off the part-cooling fan completely.

Short video of attaching the lens hood: https://www.youtube.com/shorts/92wqdpUGuZ8

Tagi