Rusty-Lok: The Tek-Lok alternative
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
**Update 1/22/2017: I uploaded the .step files for your remixing pleasures. This is a printable "teklok" style mount.…
- Ocena
- 5 / 5
- Polubienia
- 68
- Pobrania
- 389
- Wydruki
- 3
- Wyświetlenia
- 1726
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
**Update 1/22/2017: I uploaded the .step files for your remixing pleasures.
This is a printable "teklok" style mount. Use this for your mag carriers, shotshell caddies, knife holsters, whatever you want! I don't recommend using it to actually carry a pistol though, while it may hold up it would be wise to simply use the real deal.
Instructions:
-Print the parts
-Drill out the holes that the dowel pins will go in with a 3/32 drill bit
-Press in two (one on each side) 3/32 diameter by 7/8 long dowel pins (ACE hardware had them for me)
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
No
Resolution:
.20mm
Infill:
50% minimum
Notes:
It would probably be best to print 100% infill, although the one that I printed at 50% has held up fine under light loads (double pistol mag carrier).
Category: Sport & Outdoors