Raspberry Pi Canakit Cradle (3b+)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We needed to mount a bunch of Raspberry Pi units behind a series of TVs at work, so I designed a quick, slip-in…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We needed to mount a bunch of Raspberry Pi units behind a series of TVs at work, so I designed a quick, slip-in cradle. It's just snug enough to hold the Canakit case securely, but loose enough to be able to get the Pi out and switch it or perform maintenance as necessary.
This is a very lightweight unit so it prints fast with minimal filament.
You might need to rotate so that the bottom of the case is on the print bed. Fusion 360 likes to flip objects unusually when I export them.
*This cradle was designed for the Raspberry Pi 3 b+ Canakit case. It may not fit other iterations of the Raspberry Pi.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
No
Supports:
No
Resolution:
.25
Infill:
20%
Filament: eSun PLA+ Grey
Notes:
You might need to rotate so that the bottom of the case is on the print bed. Fusion 360 likes to flip objects unusually when I export them.
Category: Electronics