RatRig V-Minion - SFU1204 Ball Screw for Z-Axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace the TR8*4 Lead Screw and the TR8*4 Anti-Backlash Nut by a SFU1204 Ball Screw.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 1161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replace the TR8*4 Lead Screw and the TR8*4 Anti-Backlash Nut by a SFU1204 Ball Screw.
A SFU1204 ball screw - diameter 12mm, lead 4mm, length 300mm - is used. Additional some M3 and M4 screws, nuts and heat inserts are needed as well as a M3 or M4 T-nut drop in for the V-slot 2020.
The parts are designed to be used with the WobbleX, see Github. For this the blue colored part of the screw on the picture has to be cut off.
From my point of view the SFU1204 upgrade does not make a lot of sense without the WobbleX but if so it should work without cutting and with the standard coupler.
