Form 1 / CTC Riverside Build Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a new tray for my CTC Riverside SLA printer (basically a Form1 Clone.)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I needed a new tray for my CTC Riverside SLA printer (basically a Form1 Clone.) The price was a bit steep for a bit of acrylic and a piece of tape, so I built one. I've attached several different formats, I designed it in Sketchup, but needed a DXF for my laser cutter.
It should to be made out of 1/8" or 3mm acrylic and the large plate needs to have the silicone non-stick tape applied to the inner surface. I sealed the edges (after I acetone welded it) with simple "Shoo Goo" brand flexible rubber adhesive.
Print instructions
Category: 3D Printer Accessories Summary
I needed a new tray for my CTC Riverside SLA printer (basically a Form1 Clone.) The price was a bit steep for a bit of acrylic and a piece of tape, so I built one. I've attached several different formats, I designed it in Sketchup, but needed a DXF for my laser cutter.
It should to be made out of 1/8" or 3mm acrylic and the large plate needs to have the silicone non-stick tape applied to the inner surface. I sealed the edges (after I acetone welded it) with simple "Shoo Goo" brand flexible rubber adhesive.