Type 2 EV holder 90º Adaptor (Ohme Pro)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to mount a Type 2 EV holder 90º to normal.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 311
- Wydruki
- 2
- Wyświetlenia
- 2263
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Allows you to mount a Type 2 EV holder 90º to normal. This gave my installation a much neater look as well as preventing the cable and plug from protruding as much (ideal for me as I park parallel to the wall).
Designed for the holder that came with an Ohme Pro charger, but that looks the same as after-market ones I've seen, as well as those supplied with some other chargers (specifically, holder has 100mm radius with 60mm between mounting holes).
The holder mounts onto this adaptor with M5 bolts. There's no printed thread in the Type2Adaptor_SelfTap version - just tap one with the bolts. If you prefer to use threaded inserts, then the Type2Adaptor_ThreadedInsert version has 6.75mm holes ready for 7mm inserts. Depth of holes is 12mm in both versions.