LWC Airsoft shower Pocket Claymore P.C

Ever wanted a functional mini Airsoft Claymore?  With the pocket Claymore or short " P.C"  you got one. Fully functional spring loaded belt propelled airsoft BB mine. 
Universal mounting options with wodden sticks in the forest ground, sand or gravel. 
With a belt on trees and other Things. 
The tripwire can be used in different directions with universal tripwire leads.
Tripwire splint activated. 
Easy to find again with bright signal colors once it was activated. 

Supports: Yes
Resolution: 0.3
Infill: the lid at least 35% the base part should be fine with 30%

Notes: 
The hinge is hugely reinforce but still the biggest weak point of the whole system, so make sure you have enough infill so it wont break on you. 
The more infill on the lid the heavier and also " slower" will the BBs be propelled by the sping loaded Belt. 
The lighter the lid is the faster and snappier it swings open with the danger it will break easier.

Print the lid and the base with support from the print bed in horizontal position.

# Post-Printing

You need some additional parts for this build like:

2x  mouse traps ( standard spring loaded mousetraps) 
4x  m3 rope clamps
8x m3 nuts ( additional to the ones already on the rope clamps)
1x m4 25mm Screw + nut for the hinge
2 x m5 metal Washer ( you can also use a small coin)
some kind of splint ( whatever you want to use like a toothpick, a piece of metal wire .....)
Duc tape, pliers, isolation tape, a thin but solid wire like fishing line,