Tsetse V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I revised version of the first Tsetse micro drone with the transmitters relocated for better GPS reliability.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Please see the informational files attached.
UPDATE: Minor revisions to the GPS bracket and main chassis aft.
NOTE: The printer profile is VERY important for this model. The main chassis should be roughly 19g on completion, this is achieved by printing with a single outline perimeter and 5% infill. Load-bearing regions have been strengthened using mesh geometry so the overall durability of the printable portions isn't sacrificed.
NOTE: This model requires a custom compiled version of ardupilot, I will include this once I finish building the V2 prototype and get everything working (configuration of this thing is really a challenge due to all the weird custom interfacing of the nav system).
NOTE: It is STRONGLY recommended that BlueJay and the latest ELRS be implemented prior to the deployment of Ardupilot whilst the controller is still using Betaflight. Past that, set it and forget it.