"The Cheese Wheel" - Rodent Food Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Load your favorite treats in each compartment. Watch your pets figure out how to spin the lid get them!
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 66
- Wydruki
- 2
- Wyświetlenia
- 482
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
Hours of fun for your pet! Place food in each segment of the container and watch your pets try to find their way in! Our rats really like it.
Use a 3mm counter-sunk bolt (stainless steel preferred) to attach the lid to the container. Adjust the tighteness of the bolt depending on how easy/hard you want it to be to turn. If you use a long bolt and a washer, you can mount it to the side of your cage.
Normal print settings – 0.4mm nozzle, nothing else unusual. Should print easily in all materials, I used PLA.