1 / 15
22 cm Crochet blocking board in parts for printing on Prusa Mini — zdjęcie 1
1 / 15

22 cm Crochet blocking board in parts for printing on Prusa Mini

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

22 cm Crochet blocking board in 4 parts to print on the Prusa Mini+ including stabilization holders.

Ocena
5 / 5
Polubienia
135
Pobrania
487
Wydruki
3
Wyświetlenia
3033
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

22 cm Crochet blocking board in 4 parts to print on the Prusa Mini+ including stabilization holders.
Also known as Granny Square blocking board.

Because the Prusa mini has a print bed of 18 cm * 18 cm, I have a blocking board of 11 cm that can be linked together so that a square board can be made of 22 cm * 22 cm

The pins that are placed in the board are wooden meat skewers with a diameter of 3 mm.

The sections can of course also be used separately, but when they are linked together, a blocking board of 22 cm * 22 cm with a height of 15 mm is created

The holes are spaced at 11mm as it is apparently better for clamping than 10mm spacing. I have no idea, I designed and printed this board for my wife who has crochet as a hobby.

To prevent the wooden meat skewers from not keeping the same distance at a higher distance, I also made stabilization holders of 22 cm and 11 cm.

Requirements for a 22 cm * 22 cm blocking board:

  • 4 * CrochetBlock.stl
  • Increase wooden meat skewers with a diameter of 3 mm
  • 4 or more StableHolderLong.stl (22 cm long) that can be printed diagonally on the Prusa Mini+
  • 4 or more StableHolderShort, stl (11 cm long)

Print properties:

  • Filament - PLA or any other but not flex
  • Nozzle - 0.4mm
  • Layer thickness - 0.20 mm
  • Filling - 15%
  • Support - none

 

 

Support me with a cup of coffee.

Tagi