Snorlax Tugendpfeil (German hair stick)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hairstick with a little Snorlax cameo as a counterweight, based on the style from the Moselle region folk dress.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
There's a style of hairstick called a Tugendpfeil that I found in art and precisely one (1) museum's online images, that used to belong to the folk costume of unmarried women for the Moselle region in Germany. It's meant to hold up a braided bun and keep in place a cap… I was mostly curious how you jam something that wide through your hair, and if it's comfy.
It's very comfy. In PLA, it's very light. If you get pressure headaches from other sticks, make this wide, flat boy. There is NOTHING poking you.
My first concept was in two parts (easier to print, but you WILL get punished if your edges aren't perfectly glued together). It had a different design, and someone with more printing experience than me who was helping me troubleshoot described it as “a nightmare to get right on that scale without a resin printer”. So it got simplified to a little cameo style topper. Not super great at faces, so Lupis1's Snorlax cookie cutter was called upon to do the heavy lifting there.
This one was printed at .2 mm with 3DJake EcoPLA, positioned flat, with organic supports on the bottom side. The supports inside the cameo were wiggled out with the tip of an X-acto, the supports on the stick were peeled off, with any remnants scraped smooth with a blade. Will probably look better at a lower layer height, but it works at .2.