Vinyl Siding Clip with Keyhole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip that can be used to hang lights, frames, etc. on Vinyl Siding without screws.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 182
- Wydruki
- 1
- Wyświetlenia
- 973
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Clip that can be used to hang lights, frames, etc. on Vinyl Siding without screws.
Just push the clip through the joint between two sidings.
Removal is easy, and just requires to pull the clip towards you, and as long as there is downward force on the clip it will hang tight.
Print instructions
Category: Organization Summary
Clip that can be used to hang lights, frames, etc. on Vinyl Siding without screws.
Just push the clip through the joint between two sidings.
Removal is easy, and just requires to pull the clip towards you, and as long as there is downward force on the clip it will hang tight.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:Yes
Supports:
No
</div>Resolution:0.2
Infill:
20%
</div>Filament:
PLA PLA Black
Notes:
Supports are not needed, if you want the keyhole parts to come out looking sharp then use supports.
Just lay the part standing on it's side (STL is already oriented correctly) and print using a brim/raft