1 / 7
CNC Makita 700 / 701 Router Magnetic Dust Shoe
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to use Magnetic Dust Shoe System for 1" or 1.25" (25/32mm) Internal Diameter Vacuum Hoses
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 243
- Wydruki
- 1
- Wyświetlenia
- 2049
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (2)Kolekcje (48)Powiązane
This has been remixed for use with the Powertec 70130 dust collection hose (1" / 25mm Internal Diameter) from Amazon and to use readily available 12.7mm x 3.175mm Neodymium magnets.
Update - Jan '25: Added support for normal 1.25" / 32mm Internal Diameter Vacuum hoses.
Notes:
- Suction area has no reductions in size, so you get full air flow
- Easy on/off for changes with two small magnets
- Diverts the down draft from the router away from the cutting area
- Carefully models out the spot for the locking button
- Notch added to the top mount improve compatibility with different CNC mounts
- Added an upper version for regular 32mm ID Vacuum hoses + Hose adaptor
- 32mm Vacuum hose adaptor is intended to have the regular hose inserted into it and fixed with glue.
In action:
I now have a version for 65mm VFD Spindles.