M18A1 Claymore mine 1.25" hitch cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A claymore mine 1.25" hitch cover with a message for tailgaters!
- Ocena
- 5 / 5
- Polubienia
- 103
- Pobrania
- 297
- Wydruki
- 1
- Wyświetlenia
- 3522
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Click here for 2" hitch version
Timelapse print and demo video
This model has been modified to be one-piece with extra strength attachment at the end of the 1.25" hitch. The hitch has also been lengthened an extra 10mm to fit into a Reese 1.25" hitch. Print with tree supports in Cura and break off the support afterwards.
Paint the lettering using this paint stamp.
Models are scaled to 88 and 100 percent scale of the real M18A1 anti-personnel mine and I added some tapered support at the attachment point between the hitch and replica mine cover for extra strength.
This is modified from Anti-personnel claymore mine Hitch cover by Plastic_Innovations on Thingiverse which is a two piece version that is glued together.