1 / 1
Robot chassis for Micro Metal Gearmotors and Encoders
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A chassis base for small robots, it fits most Arduino boards or similar and it's designed to fit Micro Metal Gearmotor
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 404
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
The dimensions of the chassis are: 122x109.68x1.2mm
The mounting holes are a fit for the Micro Metal Gearmotors with or without the Encoders (http://www.pololu.com/category/60/micro-metal-gearmotors). Moreover the mounting holes, should allow the fitting of most Arduino boards or similar.