1 / 2
Organic Dice Tower
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The walls of this tower are generated by the organic supports and prevent the dice from falling off the tower side.
It needs a bit of fine tuning the angle parameters of the supports to prevent them from blocking the path. I also made the first layer of supports 100% density, but a careful removal of the print is needed to make sure the supports won't rip off the base. Also the contact distance between supports and the model are set to 0mm.
I added 3mf files for MK3 and MK4.