Bike flashlight quick mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zip tie this to your bike to allow you to quickly mount a flashlight.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 192
- Wydruki
- 3
- Wyświetlenia
- 1239
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Zip tie this to your bike to allow you to quickly mount a flashlight. Just use a little piece of rubber they usually include in these types of things to keep it from rotating/sliding.
I've uploaded a larger version so you can cut away whatever diameter your using. The key design feature is illustrated in the screenshots - make sure to make two circular cuts that overlap in a compressed fashion so that the two halves open up (via the cut in the middle) and provide a compressive force when the flashlight is inserted.
I've tuned the compression overlap to 1mm, and overhang/lip to be ~1.4mm to hold it in well, but not make it too difficult to insert/remove.
Print instructions
no need for support
relatively material/resolution agnostic