Christmas Bauble 01 (Vase Mode)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I cleaned up a set of old Christmas baubles and have derived some new things from it.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 338
- Wydruki
- 5
- Wyświetlenia
- 1734
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
I cleaned up a set of old Christmas baubles and have derived some new things from it. This is one of the newer baubles and I test printed it with a 0.8mm nozzle. The original file is a bit harder to print (because of the top) but I've also added a version that prints more easy. You might consider to play a bit with the layer height for the bottom overhang to make it print even more easily but it might work without, too.
If you like this little thing, you might want to look at those, too:
https://www.prusaprinters.org/social/3373-wilko/collections/37573
Print instructions
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
</div>Rafts:No
Supports:
No
</div>Resolution:0.6
Infill:
0%
</div>Filament:
Das Filament PETG Clear
Notes:
I've used a 0.8mm nozzle in this configuration, but it should work with smaller nozzles just fine.