1 / 3
MPLAB SNAP Debugger Oh Snap Decal Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Description
I've remixed the case with decals, because I love multicolor decals. :)
Print Instructions
Printed with standard 0.2mm settings except I have initial layer speed set to 10mm/s.
Here's my process for Inlays
- Place both the top and the corresponding inlay text in the slicer and line them up. (might have to mirror the inlay text to get it lined up)
- Delete the top out of the slicer and save that G-code.
- Ctrl-Z the top back into the slicer and then delete the inlay text model. Now save this as a separate G-code file.
- Print the inlay text model and when it finishes, leave it on the plate and make sure to keep the build plate hot. Change out filament.
- Print the top in the new filament.
- Enjoy!
Products
You can use this to debug or program. I used this guy as an alternative to a PicKit to flash a PIC MCU and it worked great! You can find the Amazon affiliate link to the MPlab Debugger below and Microchip's website for more details about it capabilities.