1 / 5
Honeycomb Storage Wall Battery holder 4 x AA and 4 x AAA
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for 4 x AA or 4 x AAA batteries
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 109
- Wydruki
- 2
- Wyświetlenia
- 484
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (34)Powiązane
There are quite a few battery holders for the Honeycomb Storage Wall, but they are either really big for lots of batteries and/or difficult to get the batteries out as they are too close together. I've designed these to hold only 4 batteries, with a bit more space to pick them out.
This part mates with the ‘insert-empty.stl’ part from the main HSW page Honeycomb storage wall by RostaP | Download free STL model | Printables.com
I print this with a 0.4mm nozzle to maintain the fitting tolerance for the mounting point.