Shark fin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Because who doesn't want a sharkfin, especially if it means you don't have to kill a shark to get it.
- Ocena
- 4,75 / 5
- Polubienia
- 84
- Pobrania
- 1540
- Wydruki
- 4
- Wyświetlenia
- 4061
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Because who doesn't want a sharkfin, especially if it means you don't have to kill a shark to get it. Round bottom has a slot that fits a 2.5" web belt and a curve so it should sit flat on an AL80 tank.
Flat bottom has no slot and a flat base.
Scale them down to 78% to fit a Prusa Mk3 when printing the fin vertically. The web slot gets too small if you go smaller.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
10%
Filament: KVP P-PLA Grey How I Designed This ===================
Onshape yet again
Like pretty much everything I do, Onshape. Easy. Fully featured. Free.
Category: Sculptures