Shelf Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found plenty of shelf brackets on Thingiverse but I wanted one with the bracket coming from above the shelf rather…
- Ocena
- 4,8 / 5
- Polubienia
- 192
- Pobrania
- 774
- Wydruki
- 11
- Wyświetlenia
- 3673
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found plenty of shelf brackets on Thingiverse but I wanted one with the bracket coming from above the shelf rather than supporting the shelf from below, to blend in with my Seville Classics lighted workbench that has a cantilevered shelf on the top.
This was designed for a 1 x 8 board (3/4 in x 7 1/4 in). How sturdy is it? I have no idea. I use it to hold my filament samples, a phone, etc. I wouldn't put anything heavy on it.
Fusion 360 file included.
Print instructions
Print Settings
Supports: No
Resolution: 0.3mm
Infill: 10%
I suggest using PETG or ABS for this. Mirror the model in your slicer, then print the original and the mirror copy side by side, right side up. No supports required.
Mount with wall anchors. Make sure not to overtighten the screws or you'll break the plastic.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.