Kitchen scale holder - Kitchen organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder to hang your kitchen scale in a cabinet.
- Ocena
- 4,914 / 5
- Polubienia
- 1825
- Pobrania
- 3395
- Wydruki
- 37
- Wyświetlenia
- 20 936
- Oceny
- 35
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple model to hang your kitchen scale in your cabinet and out of the way. Can be hanged with screws or double sided tape.
SCALE TO FIT YOUR NEEDS:
If you want other measurements, simply scale the model in the slicer using the following formulas that account for the wall thickness:
X-axis: #YOUR_SCALE_WIDTH + 7
Y-axis: #YOUR_SCALE_LENGTH
Z-axis: #YOUR_SCALE_HEIGHT + 3.85
You might want to add some mm of clearance on all axis (espescially if you're increasing the size)
Version 2:
No screw holes in order to print easier if they are not needed. Printed with supports on buildplate only.
Also created a version without the middle support section so that is suits any width. Prints best as is, with supports in the bend. Thanks for the tip @LenaEinmal_1150314