Treehouse with trees (Baumhaus)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Treehouse with Trees from Organic Supports
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 699
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Share Alike
Treehouse
The 3D-model is only the model of the house.
Trees are calclated as treesupports (organic supports).
Needed a little bit geometry on the ground to get the supports to form a single trunk instead of a plethora of branches form the ground. Those can be removed after the print such that the house can stand on the main trunk. The ladder helps stabilizing the center point of mass.
The house doesn't work without the supports, they aren't meant to be removed.
It is not easy to get the supports in this exact shape therefore I recommend you to use the gcode or at least the 3mf. file instead of just dropping the model inside your slicer with your settings.