1 / 1
Black Magic Probe v2.3 Case with M3 holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Black Magic Probe v2.3 Case with M3 holes instead of the original M2.5
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Remix of the Black Magic Probe v2.3 Case with the following differences:
- M3 screw holes instead of the original M2.5.
- No cutouts for the screw heads (partially because the wider heads on M3 screws end up being too close to the edge). This does mean the bottom part won't sit flush on a table, but that didn't matter to me.
- The holes in the top part are 4.1 by 4.25 mm, adapted for M3 heat set inserts. CNC kitchen has a 3 mm deep variant with M3 threads that should fit.
As pictured, the model was printed in ESD PETG suitable for electronic enclosures with 0.2 mm layer height and a 0.4 mm nozzle.