Arkham Horror Chaos Token Capsule
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a two part design based on coin capsules and is designed to enclose chaos tokens from Arkham Horror the card…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 861
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This is a two part design based on coin capsules and is designed to enclose chaos tokens from Arkham Horror the card game.
The inner diameter is 25.5mm to allow the token to be inserted/removed easily.
The viewing hole diameter is 22mm.
The over all capsule (two halves together) is 35mm x 4.5mm
You will need to print 44 of each piece i.e. 44 of part 1a and 44 of part 1b.
I printed mine at 0.2mm layer height, 15% infill at 60mm/s print speed.
To assemble simply put a chaos token inside part 1a and press parts 1a and 1b together.
Category: Toys & Games