Mesh / Wire Net for Bambu Lab X1C Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of mesh / wire net for the Bambulab X1-Carbon: Spacer for the glass lid by tom_the_beginner
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 124
- Wydruki
- 2
- Wyświetlenia
- 1227
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed the Bambulab X1-Carbon: Spacer for the glass lid, Abstandshalter für den Glasdeckel by tom_the_beginner. However, I did not find a fitting mesh / wire net to provide some dust protection when using the spacers. So, I simply designed my own in Fusion 360.
It is a very lightweight model that prints fast. The stripes could be a little stiffer, yet they have to fit the openings in the spacers, hence the width of only 0.3mm. For me, this did the job without overengineering the stripes.
To equip all sides with mesh, just print both models twice - front and back as well as left and right each have the same dimensions.
I printed mine in PLA and 0.2mm layer height. No support required.
This is my very first CAD design, so any feedback is appreciated.