Knife Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got bored because of COVID so I got into 3d printing, and this is the first model I've every designed ;) Its a knife…
- Ocena
- 4,7 / 5
- Polubienia
- 113
- Pobrania
- 684
- Wydruki
- 10
- Wyświetlenia
- 3911
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Got bored because of COVID so I got into 3d printing, and this is the first model I've every designed ;)
Its a knife block that holds knife! Top plate is detachable and you can design your own. Current top plate holds 2 large side cleavers knives, 2 chef knives. and 2 small steak knives.
Print instructions
No support needed ;)
Everything is printed in PLA. PETG would also work.
0.4MM nozzle, 0.3MM layer height for max strength.
Top plate is 55mm 120mm 10mm. There is a slight extrusion (5mm) on inside on the front and back of the main holder to support the plate.