Ball bearing spool holder.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently needed to design a spoolholder for my project and decided to share it with all of you.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 154
- Wydruki
- 1
- Wyświetlenia
- 851
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The main features are:
- Compared to taller and narrower stands, this one is much more stable due to a low center of gravity and a wider stem.
- Modular system to assemble several together.
- It takes up little horizontal space.
- The coils do not rub anywhere.
- Smooth and centered operation thanks to the V-wheels.
- It uses little material when printing (this was necessary because it needed 12 units).
- That does not need supports when printed.
Materials required for the assembly of 1 unit.
- 4 units M3x15mm screws
- 4 units of M3 nuts
- 4 units of 608 ball bearings of any of the types there are, ZZ, RS ...
If you like my designs, consider following me and post a Make
Printing tips:
- Print on PLA or PETG without supports.
- Layer height 0.2 is sufficient.
- Sand the seam of the wheels only on the outside for a smooth operation.
- The wheels fit perfectly under pressure, you can help yourself with pliers.