Honeycomb Wall Holder - LUCKY 13 Base Joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hex holder to support LUCKY 13 Jointed Figure by soozafone
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 1187
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Share Alike
Hex insert holder for the wonderful LUCKY 13 Printable Jointed Figure created by @soozafone to provide a LUCKY 13 creative flare to your honeycomb wall.
Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced friction) and here (rotated position).
Hex insert peg designed with flex in mind so that holder can be inserted without requiring much force to insert or remove from wall.
Print without need for supports, the hex insert is flat to the print bed.
Printed at .20mm layer height, printed in PLA+ (although better to be printed in PETG)