Gaggiuino 3.5 inch housing and a partial conversion of a 3.5 inch HMI/TFT file
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TFT file that has the main screen and some other screens converted to work with 3.5 Inch Nextion Discovery LCD.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 1126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a TFT file created by Steve Nofs of the Facebook group that has the main screen and some other screens converted to work with 3.5 Inch Nextion Discovery LCD.
Fork of project site:
Open-Espresso/gaggiuino-builders: A Gaggia Classic control project using microcontrollers. (github.com)
Discuss:
Gaggiuino Builders | Facebook
This uses two 60x10x3mm magnets. I suggest glue or hot-glue them in place rather than use double-stick tape.
Note that this license is restricted and non-commercial use only due to having to match the original license. My STL and Fusion 360 files are also available as a free commercial license.
You can buy the PCB enclosure printed from my site: PCB V3 Enclosure – Matter-Replicator
Get a build kit here: Build kit for V3 PCB – Matter-Replicator
Get a PCB here: V3 PCB – Matter-Replicator
The Gaggiuino© logo and name is © Zer0-bit. I am not affiliated with the creators of the project.