Camera buckle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Originally from here: https://cults3d.com/en/3d-model/gadget/cam-buckle Width for strap is approximately 27mm(1 inch)
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 224
- Wydruki
- 1
- Wyświetlenia
- 1141
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Width for strap is approximately 27mm (1 inch according to creator)
I printed with supports, but not sure if it is needed. I used PETG for printing.
The buckles are quite sturdy, as I can use them on my dogs harness without them coming off or breaking.
The small cross-bar right at the back at the bottom of the buckle broke off for me (see picture below), but I did not need it. Overall a really nice design and model.
Originally from here:
https://cults3d.com/en/3d-model/gadget/cam-buckle
All rights to the original owner