Bubbler water air separator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this has a input in the bottom with the flow going up. fill port for particulate water filter and droplet separator.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 765
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
if using this for consumption understand all risks involved with materials cleaning storage etc…
I imagine you already know what this is or how it can be used but here's some I think useful information.
10.4mm input at the bottom. the fill port cap needs to be redone it is too small and it was mostly a after thought.
this is currently V0.1a so expect problems im new to cad and still learning no support prints so some overhangs get weird maybe lower your bridge speed and increase fan speed?
i printed this with 0.28 layers on a bambu p1p with 0.4 nozzle
pla has a small weep but only after some some time I'm trying with petg.
dont over fill with and theres no blow back prevention so dont blow unless you want to evacuate all of the water