Wall planter (selfwatering)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small wallmounted planter to hang in your garden, on a fence, shed etc. Comes with an optional water reservoir.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 852
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple wallmounted planter. The design was made in Fusion 360.
Update v2:
Added an insert that acts as a reservoir to catch that precious (rain)water and turns the pot into a selfwatering planter.
The insert is placed with the text FRONT on top and facing the front of the pot.
The pot is printed in ASA but PETG, ABS would work too. ASA is prefered for the UV resistance in the outdoors.
The insert for V2 can be printed in any material.
Here are my print settings, but feel free to try your own:
- 0.25 layer height
- 3 walls/perimeters
- 20% infill
- no supports needed
For a total of ~150gr of filament.
Enjoy!