Case and Stand for Raspberry Pi 7 inch Touch Screen..Mini Monitor!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My friend bought a Raspberry Pi 7 inch Capacitive Touch Screen HDMI Monitor. He wanted a case and stand for it. Enjoy!
- Ocena
- 5 / 5
- Polubienia
- 172
- Pobrania
- 1060
- Wydruki
- 2
- Wyświetlenia
- 9552
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
My friend bought a Raspberry Pi 7 inch Capacitive Touch Screen HDMI Monitor. He wanted a case and stand for it. I found a case for a similar monitor and remixed/remodeled it to fit. I made a lot of improvements to the case for printing and functionality. Mini monitor project. Prints in 5 pieces.
I designed an integrated stand for it Based off this print by the same author.
https://www.prusaprinters.org/prints/10887
Hardware needed:
8x M3 8mm hex socket cap head bolts for the base and case attachment.
4x M3 20mm hex socket cap head bolts for the case.
12x M3 nuts.
The design uses captive M3 nuts.
This is the link to the 7" monitor my friend bought.
EDIT: I added a notch on the case front to make more room for the Micro USB and HDMI plugs. Bulky plug housings may not have fit. I reuploaded the fixed files.