1 / 13
12V7A UPS LiFePo4 battery (4s1p & 4s2p) — zdjęcie 1
1 / 13

12V7A UPS LiFePo4 battery (4s1p & 4s2p)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printable battery trays for LiFePo4 32700 cells for a 12V7A UPS battery housing.

Ocena
0 / 5
Polubienia
23
Pobrania
131
Wydruki
0
Wyświetlenia
1242
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Tray inserts for a LiFePo4 battery pack for UPS 12V7A battery case.

I am using a 30A BMS to go with the battery pack made out of Liitokala 32700 LiFePo4 cells. Mine measured at around 6300mAh when discharged from full to 2.7V (per cell).
The 12V7A empty case came from Aliexpress.
UPS (300W) does not know the difference and (dis)charges with no issues.

 

4s1p

Bottom tray is slightly smaller than the top tray due to the  shape of the empty case.
I used hot glue to secure the batteries to the trays. And applied a thin bead of hot glue on the top to fix the lid in place plus ran capton tape around on the outside seam.

The full pack comes in at slightly above 6Ah.

 

4s2p

I used hot glue to attach the trays to the batteries. BMS tray is hot glued on top. Thin bead of hot glue around the top to fix the lid in place plus ran capton tape around on the outside seam.

The full pack comes in at around 12.6Ah.

Tagi