35mm Solenoid Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of a 35mm solenoid intended for use as a nerf pusher, originally found by /u/thejesusfreak on reddit.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This is a model of a 35mm solenoid intended for use as a nerf pusher, originally found by /u/thejesusfreak on reddit. Should be similar to this one on banggood, probably also available on eBay/taobao/etc. if you google it. This is a somewhat rough model but the key dimensions should be there for clearancing around the moving parts and anchoring. Has not been tested against a printed project using this measured model as reference.
080918 UPDATE: Oops! Accidentally drew the model in inches. New source file should be correct scale.
Category: 3D Printer Accessories