Bobbin for Ashford Spinning Wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard Drive, Single Flyer bobbin for Ashford spinning wheels. Simple assembly.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 263
- Wydruki
- 1
- Wyświetlenia
- 1369
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DESCRIPTION
Standard Drive, Single Flyer bobbin for Ashford Standard and Traveler spinning wheels. Modeled directly off of the “standard” wooden bobbin (see pictures). Prints in two pieces, with fairly simple assembly.
FEATURES
- Speed holes!
VARIATIONS
None
PRINTING
Material
PLA works fine, but PETG would probably be a bit more durable.
Layers/Nozzle
Optimized for 0.2mm layer heights and 04.mm nozzle, but you should be able to print it with just about anything.
Supports
No need for supports, rafts, or brims. Print orientation should be pretty obvious.
Perimeters and Infill
You want fairly thick walls on this one (at least 2mm). I'd suggest making the shaft solid (with sufficient perimeters or 100% infill). The endcaps only need enough infill to support the top surface. The speed holes actually provide a fair amount of strength and rigidity.
POST-PROCESSING
De-burr the inside edge of the shaft holes to make sure the axle slides in smoothly. You should also remove any overextrusion nubbins or stringing from the inside of the spool, to keep it from catching on the yarn. Fine-grit sandpaper should be fine for this.
To assemble the bobbin, simply glue the endcap onto the narrow end of the spindle. I used medium-viscosity CA glue, but epoxy should work fine. Maybe even hot glue, if you're not using the small end to tension on.
VERSIONS
v1 - Initial version (pictured)
v2
- Axle bore diameter made slightly bigger
- Added more SPEED HOLES
FEEDBACK
I'm more than happy to consider any recommendations or variation requests. I made this for a friend, who seems quite happy with it, but I don't do spinning myself, so it's entirely possible that there is some feature or aspect that could be improved.