WetJet Refill Port
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mashup/remix of the two great Things
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a mashup/remix of the two great Things
I took the plate and o-ring capture part from Thing 4526544 and reduced the height of the thread and cap from Thing 3696263 and added in the o-ring location part.
The o-ring I've used is an*R20* and is 100% watertight
I had to print my cap at 103.5% inorder to be able to screw it on/off properly YMMV
Added another version which would allow the bottle to be removed from the cleaner and stood as normal. This one is an insert that sits flush with the base of the bottle. It works nicely but takes 1/3 more filament than the first design