1 / 2
Charlotte valve for Body Glove Aire — zdjęcie 1
1 / 2

Charlotte valve for Body Glove Aire

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
100
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

This is a remix of the brilliant Charlotte valve to be used with the Body Glove Aire mask (available from Costco). I'm no good with F360 so this was done using TInkercad.One is a remix of the original the other has a strengthened tab

Need someone who knows F360 to remodel this properly please. Only he tab needs to change, see drawing for required changes - thank you in advance

The more of these variants there are the more options our medical professionals have. The better it is for ALL of us regardless of who we are and were we live

*Also check out* https://www.thingiverse.com/thing:4241599

This strengthens the tab, ironmanromeo has also created a support unit to be used if/when the tab breaks off

Forgot that the inside 'box' near the tab also needs to be lowered by about 2.5

*Update* See v1.9

Butchered the part in F360 and found the tab sides needed to reduce by roughly 3.2mm not 3.5. Manged to fudge it and made the required changes. However not able to work out how to fill-in the gap created by reducing the tab. Likely another way of doing it but still beyond my knowledge

 

Tagi