Extendable Frozen Food Fish Feeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed this for a friend, i don;t have any fish Print top part upside down without supports and bottom part right way…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Printed this for a friend, I don't have any fish
Print top part upside down without supports and bottom part right way up with supports
Mesh is 2mm and the parts were printed in PETG
Top part fits snugly into the bottom part, which has a grill, so you can shorten or extend the length
Update
Completely recreated using Fusion 360 for @AmmarMUD
Made models with 2, 3 and 4mm hex holes. Each F3d file has paramters as seen in the photo
I'm still not great with getting rectangular patterns to be ‘easily’ changed - which is why I ended up doing different models
Don't recall why I had the hole platform offset from the bottom, same for the bottom part stand-off. So I made more versions with the hole paltform at the bottom of the lower tube, and even more with the stand-off at the bottom too
The top and bottom tube's will be a tight fit, by design. If it's too tight you could alter the print % in your slicer or just use a bit of sand paper
I have not printer any of the news models, so please let me know if you have any issues with them