HEVO Power Port
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
May not be of use to anyone else, but it's here if it is. It is a plate to accommodate the power switch and power…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
May not be of use to anyone else, but it's here if it is. It is a plate to accommodate the power switch and power cable for the HEVO
My HEVO frame has a section at the bottom of the frame where all the electronics will be. The gap between the bottom rail and the next vertical rail is 75mm (I posted a measuring block earlier that is 75mm on one side and 100mm on the other) This plate fits into that space.
I designed 2 versions, one deep to enclose all the power connectors and one shallow. The shallow one was a test print to check dimensions. As all my connectors are sheathed, can't touch the bare metal of any of them, I figured it was good enough for my use.Use the deep version if you want more coverage/protection
Print Settings
Rafts:
No
Supports:
Yes