Dice Tray V2 for Contemporary Dice Tower/Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated Dice Tray to go along with Contemporary Dice Tower/Storage v2 by dePrintinator
- Ocena
- 4,967 / 5
- Polubienia
- 248
- Pobrania
- 1353
- Wydruki
- 35
- Wyświetlenia
- 5563
- Oceny
- 30
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an updated of a model I made to go along Contemporary Dice Tower/Storage by dePrintinator. If you don't have his model already you should check it out. It's a nice design.
** This is just the tray, the tower it was designed for can be found here:
Contemporary Dice Tower/Storage v2 by dePrintinator | Download free STL model | Printables.com
Based on feedback, I made a few adjustements. The main differences in this Dice Tray update are:
- The walls are 1.5mm vs 1mm in the old model.
- The tower sits lower to keep dice from bouncing out of the tray.
- The fit of the tower is very snug now. Perhaps too snug for most printers. The old version was way too lose.
** If you have trouble printing things with tight tolerances, you should consider printing it at 101% or more.